Twin-Screw Compounding and Granulation System, Oty: 1

• Country: Oman
• Summary: Twin-Screw Compounding and Granulation System, Oty: 1
• OMT Ref No: 121110293
• Deadline: 23 Jun 2025
• Financier: Self Financed
• Purchaser Ownership: Public
• Tender Value: Refer Document
• Notice Type: Tender
• Document Ref. No.: 7022/25/0068
• Purchaser's Detail:

Purchaser : SULTAN MARKS UNIVERSITY HOSPITAL
Sultan Qaboos University Hospital P.O. Box 38 P.C. 123
Email :j.manibo@squ.edu.om
URL :https://www.squ.edu.om/

• Description:
• Category : Equipments
  SQU Product Code : EQUINSRES0555
  Description : TWIN-SCREW COMPOUNDING AND GRANULATION SYSTEM
  Quantity : 1
  Remark : Twin Screw Extrusion SystemThe requirements:1- Supply, installation, and commissioning of a complete twin screw extrusion system intended for the development and production of various food products, including breakfast cereals (flakes, rings, and puffed balls), plant-based meat analogues (wet-textured protein), and pasta.2- The system should include a twin screw feeder with a 20-liter hopper, capable of feeding between 50 to 800 liters per hour. The feeder should be driven by a 1.5 kW motor, equipped with inverter-based frequency control and a deceleration gearbox with a speed ratio of 23.3- The twin screw extruder should be equipped with a 7.5 kW main motor controlled via an inverter. It should include a high-torque gearbox with an output speed of 600 rpm and a torque capacity of 2x85Nm, coupled using an elastic column-pin-type coupling. 4- The screw elements should be made of high-speed tool steel, and the barrel must be constructed from food-grade stainless steel. 5-The shaft should be made of a high-strength alloy steel. 6-The system should support a maximum screw speed of 600 rpm, with a screw diameter of 26 mm, a barrel inner diameter of 26.5 mm, a center height of 1000 mm, and a barrel length-to-diameter ratio of 32. 7-The production capacity should range from 5 to 20 kg/h.8-Included in the system should be a soft water cooling unit with a 0.55 kW stainless steel water pump and water tank, along with a liquid injection system using a 0.37 kW plunger metering pump. 9-The electric control system should consist of a programmable logic control (PLC) cabinet with standard industrial electrical components.10-Product forming accessories should include:A-Molds and pelletizers for breakfast cereals such as flakes, rings, and puffed crispy ballsB-A cutting system with air shieldC-Screw core shaft assemblies for cereal ...
• Documents:

 Tender Notice